How To Change Light Bulb In Outdoor Lantern?[10 Steps]

BestHurricaneLantern is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our affiliate disclosure

How To Change Light Bulb In Outdoor Lantern? Battery-powered tabletop lanterns, on the other hand, add the same visual appeal to eye level when softly lighting items such as bowls of snacks, drinks, board games, and more while entertaining outdoors. 

To provide diffuse, glare-free nighttime lighting that doesn’t detract from other backyard lighting, choose lanterns with a translucent rather than a clear glass covering. 

Nothing beats a relaxing dinner or drink with friends in the garden, particularly on a warm summer evening. 

While permanent lighting fixtures concentrate on functionality, new outdoor lanterns will have a different but equally important mission: to build the ideal atmosphere by combining flickering pools of light with a hint of nostalgia.

Outdoor lanterns come in two varieties: standing and hanging.

Standing lantern is the most convenient, portable, and adaptable position! If you put them on a table, they’ll become the focus of attention, and if you leave them around the seating area after the sun goes down, they’ll build a virtual bubble around you and your guests. 

You might use standing lanterns to light the path from the gate to your main door if you don’t have any permanent garden lights. The hanging lanterns require the use of a hook, these outdoor lanterns are a little more restricted. 

However, they could be a better option if there’s a specific area in your garden or patio that needs to be lit all of the time, particularly if the lighting above your table and chairs isn’t bright enough or, on the contrary, is so bright that it ruins the atmosphere: the ideal balance will be achieved with hanging lanterns.

Advantages of an Outdoor Lantern

If you live in a single-family home, a townhouse, or a condominium, outdoor lighting should be treated with the same care as indoor lighting. 

After all, there are many advantages to using outdoor lighting. The outdoor lantern is commonly used for this purpose, and it offers the following benefits:

  • After dark, it provides enhanced protection. It not only makes it easier to navigate around the outside of your house, but it also helps to deter crime.
  • Allows for navigation (seeing how to get from one location to another).
  • When family and friends walk through the front door, they are greeted with a warm welcome.
  • Interesting landscape or architectural features are highlighted and drama is added.
  • Aids in the creation of welcoming and communal environments, such as a designated seating or entertainment area.
  • Allows for nighttime outdoor grilling, which is especially useful during seasons when the sun sets earlier.
  • Increases curb appeal—not only when you’re living there, but even when you’re about to sell.

The outdoor lantern uses a variety of power sources to provide illumination, as explained below.

Types of Power Sources

Solar, battery-operated, and candles are the most popular power sources, but you can also go for something different with oil, gas, or fairy lights. 

Take into account practicality and protection as well as the environment you want to develop. The different types of power sources are described below.

Candles

You can’t go wrong with candles when it comes to ambient lighting! Your guests will be transported back in time thanks to the ever-changing pools of light produced by their flickering flames. They’ll be ideal for your summer evenings if you love spending time in the garden and don’t mind lighting them individually each time.

Oil or gas

If you’re a vintage aficionado, you might want to play around with these vintage-style lanterns, particularly if you’re going to hang them or set them on a table.

Solar power source

If you don’t always want to go around the garden lighting up each lantern, this eco-friendly alternative is ideal. Bear in mind, though, that they’ll be lit up every evening until dawn! 

If you just intend on turning them on when you have guests over, this may not be the best option unless you hold them under your patio and carry them out to charge before a special event.

Battery

They mix custom and modern luxuries by using fake candles or artificial flames. Not looking forward to manually lighting the candles every time? If the side of your garden doesn’t get enough sunlight to power the solar lanterns, or if you don’t want them to be on every night, go for battery-powered lanterns.

Some models also come with a timer, allowing you to programme them to turn on and off whenever you want. Choose LED lamps, which use less energy and last longer than conventional bulbs, or rechargeable lanterns with USB cables for a more environmentally friendly choice.

You can read our buying guide to choose the best outdoor light bulbs for lanterns

Detect and patch a fault in an outdoor lantern’s light

Since each lantern uses a different light source for illumination. The reasons for not turning on the lights vary as well. Here’s a short overview of what they’re about.

We are major fans of solar lights right now, but we also recognise that they can cause a lot of problems for some people. If you’re having trouble with yours, try a few of our helpful hints and see if you can get them working again.

  • Make sure solar light is turned on. People also are unaware that their lights have an on/off switch.
  • Make sure the battery doesn’t have a pull tab. This only applies to lights that have recently been purchased. 

Before the light can work, there might be a pull tab on the battery that needs to be removed. If your new light isn’t working, double-check this.

  • To check for light, cover the panel. Solar-powered lamps, on the whole, do not work throughout the day. You’ll need to fully cover the solar panel to simulate darkness in order to test whether the light is working.
  • Make sure the solar panel is free of debris.The amount of charge earned can be affected by a dirty screen.
  • Make sure the solar panel is in the right place.Otherwise, the panel can not obtain enough charge if it is not exposed to sunlight for the whole day (or at least the majority of it).
  • If at all necessary, test with normal batteries.The batteries are usually to blame when solar powered lights don’t function. 

They are either not getting or not carrying the fee. If the lights operate with regular batteries, the issue is most likely with the rechargeable batteries or the solar panel.

  • Switch off the device and leave it to charge for 72 hours. Many solar lights will continue to charge even if they are switched off, and by doing so, you are allowing the battery to fully charge over many days of sunlight. It would be a good idea to do this on a daily basis with solar lights.

If anything else fails, get in touch with the store where you bought your lights. A 12-month warranty applies on all of the lights. 

The lanterns that use battery or LED lights for illumination do not switch on for the reasons mentioned below.

  • Bulb has burned out.
  • The power has been turned off.
  • An erroneous wire link.
  • Malfunctioning switch

Replace the light bulb and/or make sure the power supply is turned on and/or check the wiring to solve the problem.

Another issue is that when the light is switched on, the fuse blows or the circuit breaker trips. This is due to grounding out of crossed wires or power wires. By inspecting the cross wires, this can be remedied.

How To Change Light Bulb In Outdoor Lantern?

Changing the light bulb in an outdoor lantern is a simple procedure which includes the following steps:

Step 1: To check your outdoor lantern, stand on a ladder that puts you at a comfortable height.

Step 2: Switch the lantern’s top and bottom finials (decorative knobs or points) counter-clockwise to see whether they work. Bolts are sometimes used to keep the light cover in place. Continue unscrewing until you can remove the cover and change the bulb if one of the finials turns.

Step 3: In the area where the transparent or frosted portion of the light cover meets the fixture’s framing, look for screw or bolt heads.

Step 4: With a screwdriver, turn some screws counter-clockwise, or turn bolt heads counter-clockwise with your fingertips. The cover is held in place by one to three screws in most fixtures.

Step 5: In your free hand, hold the light cover in place as you cut the screws or bolts, then pull it free once they’re gone. Remove it with caution so that the cover does not touch and break the light bulb.

Step 6: Remove the light fixture that is encircling the light bulb.

Step 7: Remove the bulb that needs to be replaced.

Step 8: Insert the new bulb into the socket with a twist.

Step 9: The fixture should be replaced.

Step 10: Attach the screws to the unit’s top and bottom.

Read more about how to change light bulb in outdoor lantern

Conclusion

The outdoor lantern has a lovely appearance. However, if the lantern’s light bulb is turned on, it will be for naught. To maintain the original attractive appearance, it must be changed as soon as possible. 

The reasons for turning off a light bulb are discussed in the article. It is described how to change the light bulb in outdoor lantern.

Leave a Comment