BestHurricaneLantern is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our affiliate disclosure
To create localised lighting on a work surface, under-cabinet lighting is usually installed underneath a cabinet, shelf, or similar surface. Under-cabinet lighting can be used as a nightlight as well.
Under cabinet lighting designs that are unique and well-crafted are gaining a lot of traction. As opposed to traditional designs that have electric lamps on the walls and ceilings, under cabinet lighting offers a number of benefits. In this article, we will learn how to change bulb in under cabinet light.
Table of Contents
Benefits of Under Cabinet Lighting
Styling and Design in the Modern Era
One of the easiest ways to incorporate a modern style and design into one’s home is to install under cabinet lights. While most people use lights and lamps on the ceiling, using under cabinet lighting creates a special and artistic look in the space.
Additionally, under cabinet lighting can be installed in a variety of spaces, including the kitchen and other parts of the building.
Under cabinet lighting not only adds elegance and design, but it also improves efficiency by offering a more attractive and energy-efficient solution.
You can read our blog on how to change light bulb in outdoor lanterns
Work Area with no Shadow
By providing much superior lighting architecture, an under cabinet lighting system eliminates unnecessary shadows. When opposed to an under cabinet lighting scheme, traditional ceiling lights are more susceptible to unwanted shadows.
The under cabinet lighting system will provide enough illumination to even the deepest corners of drawers and cabinets. Under cabinet lighting has a growing advantage over traditional lighting systems, making it ideal for kitchens and study rooms.
Energy Saving
The total use of energy is reduced because the under cabinet lighting system requires a range of small bulbs to provide sufficient illumination. Increased lighting efficiency without increasing energy spending is a great compromise, particularly in today’s world of rising power prices.
Under cabinet lighting designs are a stylish, modern, and energy-efficient alternative to traditional lighting methods. It’s no surprise that under cabinet lighting is becoming increasingly common around the world.
Variation in Bulbs
When using an under cabinet lighting system, the user has the option of selecting from a wide variety of bulb options. No other traditional lighting system provides the consumer with the same level of versatility.
Halogen bulbs, Xenon bulbs, LED bulbs, incandescent bulbs, and fluorescent bulbs are all choices for under cabinet lighting system bulbs. Depending on their budget, the room being used for under cabinet lighting design, and other design factors, users can choose the right bulb for their lighting system.
Money Saving
While it is true that small items come in large packages, under cabinet lighting solutions are special in that they are cost effective and can be used by people from all walks of life. The under cabinet lighting system’s unique selling proposition is its small lamps, small wires, and ease of installation.
It’s worth a shot if you can get an international design, style, and aesthetic appeal for a fraction of the cost of traditional lighting methods.
Easy to Install
Under cabinet lighting systems are easy to instal and can be completed by someone with a basic understanding of wires and bulbs.
To have an under cabinet lighting system in one’s home, one does not need to rely on any technical installation personnel. Installing it is easy, fast, and painless.
Types of Under Cabinet Lights
Puck and linear lights are the two most popular types of under cabinet lighting.
Puck Under Cabinet Lights
Puck lights come in round or oval shapes and they’re ideal for cabinet and show lighting. Instead of providing even illumination around the counter top, puck lights may produce scallops, spots, or pools of light.
Under cabinet lighting with puck lights has long been a common option. They’re small, cylindrical lights with a diameter of 2-3 inches, shaped like a hockey puck. They usually use halogen or xenon bulbs that produce around 20W of light.
Many xenon and halogen puck lights run directly on 120V AC, but others need a transformer to reduce the voltage to 12V. Keep in mind that these transformer devices are bulky and will take some ingenuity to conceal under a cabinet.
Puck light fixtures are normally installed on the underside of cabinets with small screws that come with the product. LED puck lights now dominate the market and provide comparable efficiency by using a fraction of the capacity.
LEDs run on low voltage DC rather than AC line voltage, so they’ll need a power supply to convert the line voltage. You’ll need to find out a way to keep the power supply concealed in your fridge, or deal with a “wall-wart” that plugs directly into the electrical socket, much as with 12V halogen puck lights.
However, since LED puck lights are so effective, some can even be powered by batteries. This will remove the need to run electrical wires, simplifying installation and removing the messy appearance of loose electrical wires.
With a directed beam that casts an approximately triangular beam shape directly under each puck light, puck lights, like spotlights, provide a more dramatic look. Depending on your tastes and preferences, this may or may not be an attractive look.
Linear Under Cabinet Light
Linear lighting may be in the form of a light strip, a linear fixture, or a light bar. On a single mounting strip, linear fixtures imitate small puck lights.
Light strips with a width of less than one inch are very narrow. They’re sold by the foot and can be cut to length on the job site. Fluorescent lamp fixtures built for under cabinet use to bar and strip forms of under cabinet lighting.
As opposed to puck lights, fluorescent light bar lights usually have the ballast and other drive electronics embedded in the fixture, making installation and wiring easier. The T5 fluorescent fixture is the most common type for use under cabinets because it has a smaller profile.
The mercury content of fluorescent strip lights for under cabinet use is a major disadvantage. Mercury vapour from a fluorescent lamp would need significant cleaning in the rare but still possible case of a lamp breakage. Toxic chemicals like mercury are certainly a risk in a kitchen setting.
Linear lamps, unlike puck lights, emit light equally throughout the length of the bulb, resulting in a more even and seamless light distribution. LED strip lights and LED bar lights are now viable options. Integrated LED light bars and LED strip reels are also options.
Some LED light bars also support daisy chaining, which means that multiple light bars can be connected in a row. This simplifies installation by eliminating the need to run separate wires for each fixture.
Parts and Fixtures Replacement of Under Cabinet Light
It’s important that you know how to repair your lights if they die or burn out. Should you keep your current lights running with replacement parts or replace them entirely? It is very much dependent on the light source.
Xenon light
You can quickly replace the xenon light bulbs and keep using the fixtures if your xenon under cabinet lights flame out, which they will after a few years.
It’s really easy to do, and it’s a lot less expensive than replacing each light fixture individually. You would also want to keep a few spare light bulbs on hand so that you can replace them quickly if the lights go out.
Fluorescent light
When the fluorescent light bulbs in your under cabinet lights flame out, it’s also simple to replace them. This would cost less than removing the entire light fixture in most cases, and it will save you time.
Simply ensure that your new light bulbs are the same size, colour temperature, and lumen production as the ones you’re replacing.
LED light
The method of replacing LEDs is more difficult. Since many LED under cabinet lights contain diodes, it’s virtually impossible to remove them and replace them with new ones. As a result, if your LED burns out, you’ll have to repair the whole fixture. This shouldn’t concern you too much, because by the time your LEDs need to be replaced, you’ll have a multitude of new, cost-effective options to choose from.
How To Change Bulb In Under Cabinet Light?
Step 1: Before handling the light fixture, switch it off and give enough time for the device and bulb (lamp) to cool down.
Step 2: By rotating the lens cover counter-clockwise, the lens cover can be removed from the Xenon heads. Be sure not to drop the lens, as it will break.
Step 3: Grasp the bulb tightly with a cloth or paper towel and take it out of the socket. Replace the bulb with a new one, holding it in place with a paper towel or sheet.
Step 4: Align the three (3) attachment legs in the lens cover with the corresponding holes in the head to reattach the lens cover to the head. To secure the lens, turn it clockwise. The lens cover also serves as a lamp and UV shield. Do not use the Xenon lights unless the covers are in place.
Read more about how to change bulb in under cabinet light
Conclusion
Investing in new under cabinet lighting for your home is a wise decision, as it can improve the usability as well as the aesthetics of a room.However, if the under cabinet light’s lamp fails, the entire effect is lost. So, in this article it explains how to change the bulb in an under cabinet light.
Hey! I’m James Miller, author of BestHurricaneLantern website. I’m an outdoor camping enthusiast and lantern is foremost thing every camper must know. I’ve started this blog few years ago to help you find out your Best Hurricane Lantern.